The KitchenAid stand mixer is a must-have for professional kitchens and home cooks alike. This versatile and powerful kitchen appliance can tackle a range of tasks from whipping cream to kneading dough. However, knowing how to disassemble it properly to clean or fix a problem is crucial. In this blog, we will give you a step-by-step guide on how to effectively disassemble your KitchenAid stand mixer.
Step 1: Gather the Necessary Tools
Before you begin disassembling your KitchenAid stand mixer, make sure you have the following tools at hand:
- Slotted screwdriver
- Phillips screwdriver
- towel or cloth
- Bowl or container to hold small screws and parts
- cleaning brush or toothbrush
Step 2: Unplug your stand mixer
Always remember to unplug your stand mixer before you start disassembling it. This step keeps you safe throughout the disassembly process.
Step 3: Remove Bowl, Attachments and Whisk
Start by removing the mixing bowl from the stand. Rotate it counterclockwise and lift it up. Next, remove any accessories, such as whisks or paddles, and set them aside. Finally, press the release button or tilt up to remove the whisk.
Step 4: Remove Trim Strip and Control Panel Cover
To access the internals of your stand mixer, you’ll need to remove the trim band. Gently pry it off with a flathead screwdriver. Next, use a Phillips screwdriver to unscrew the screw on the back of the mixer head and remove the control board cover.
Step 5: Remove the gearbox housing and planetary gears
Once the control board cover is removed, you will see the gearbox housing and planetary gears. Use a flathead screwdriver to remove the screws securing the gearbox housing. After removing the screws, carefully lift the transmission housing. You are now ready to use the planetary gears.
Step 6: Cleaning and Maintaining Internal Components
Once the basic components have been disassembled, it’s time to clean and maintain them. Wipe away any dirt, grease or residue with a cloth or towel. For hard-to-reach areas, use a cleaning brush or toothbrush. Make sure all parts are completely dry before reassembling.
Step 7: Reassemble the Stand Mixer
Now that the cleaning process is complete, it’s time to reassemble your KitchenAid stand mixer. Perform the above steps in reverse order. Make sure all components are securely in place.
Disassembling and cleaning your KitchenAid stand mixer is critical to maintaining its performance and life. By following this detailed step-by-step guide, you can disassemble your stand mixer with confidence and hassle-free. Just remember to use caution and refer to the manufacturer’s manual if needed. With proper care and maintenance, your KitchenAid stand mixer will continue to be a reliable companion in your culinary endeavors.
Post time: Aug-17-2023